ماژول DC-DC کاهنده 3 آمپر MP2315 با خروجی 1.8 الی 12 ولت
ماژول کاهنده 3 آمپر با ولتاژ ورودی 4.5 تا 24 ولت و خروجی 1.8 الی 12 ولت قابل تنظیم به صورت لحیمی
ماژول DC-DC کاهنده 3 آمپر MP2315 با خروجی 1.8 الی 12 ولت
ماژول کاهنده 3 آمپر با ولتاژ ورودی 4.5 تا 24 ولت و خروجی 1.8 الی 12 ولت قابل تنظیم به صورت لحیمی
ماژول کاهنده ولتاژ 3 آمپری DC-DC این ماژول، مبدل باک با جریان خروجی 3 آمپر است. در این مبدل امکان تغییر ولتاژ توسط پتانسیومتر قرار گرفته شده بر روی ماژول وجود دارد. در حالت پیک جریان تا 3A می توان خروجی گرفت.
With a new original US chip, the output current is up to 3A, and the long-term operation is 2.1A. Output can be set to adjustable voltage and fixed voltage.
With a new solution design, the circuit design does not require electrolytic capacitors and tantalum capacitors (electrolytic capacitors have a short lifetime and the tantalum capacitors are in danger of explosion).
The new scheme adopts synchronous rectification, and the circuit conversion efficiency is very high. When the 6.5V to 5V 0.7A, the efficiency is as high as 97.5%, and when 12V turns 5V 1A, it also reaches 94%.
High current shielding inductors and ultra-low internal resistance maximize conversion efficiency. Reduce heat.
Mini, 20 (L) * 11 (W) * 5 (H) mm. Ultra-low static current, static current 0.85 mA. Connecting to car batteries without switching, can be on the cigarette lighter line, or on the ACC power line.
Input Voltage: DC 4.5-24V
Conversion Efficiency: 97.5% (highest) (6.5V to 5V, 0.7A)
Switch Frequency: 500KHz
Output Ripple: 20mV(12V to 5V, A) 20M width
Output Over-voltage Protection: no
Temperature rising range at full load: 40℃
Static Current: 0.85mA
Voltage Adjustment Rate: ±0.5%
Dynamic Response Speed: 5% 200uS
Output Short-circuit Protection: yes, please don’t keep making it short-circuit.
Output Reverse Connection Protection: no
Wiring Method: soldering
Input Method: soldering
Output Method: soldering or pins
Welding Hole Spacing: 2.54mm
Operating Temperature: -40℃ ~ +85℃(Industrial class) (The higher the operation temperature is, the smaller the output power is)
Output Voltage: Integrated adjustable and fixed output (Adjustable range is 0.8-17V, fixed output are 1.8V, 2.5V, 3.3V, 5V, 9V, 12V that can be chosen on the back side)
Output Current: 3A max (please enhance cooling work when it is full load); When real tested input 12V and output is 1.5A, no need to add special system.
Enable Function Control: yes, Low electric level will stop working when high electric level is working. High electric level is 2-5V, low electric level is 0V or so.
مشخصات
ماژول DC-DC کاهنده 3 آمپر MP2315 با خروجی 1.8 الی 12 ولت
ماژول کاهنده 3 آمپر با ولتاژ ورودی 4.5 تا 24 ولت و خروجی 1.8 الی 12 ولت قابل تنظیم به صورت لحیمی
ماژول تستر انواع پروتکل های فست شارژ PD/QC/AFC
ماژول مبدل DC-DC افزاینده XL6009/LM2577
مبدل DC به DC معماری BOOST افزاینده ولتاژ تا 35 ولت و حداکثر جریان خروجی 2.5 آمپر
ماژول مبدل DC-DC افزاینده ولتاژ 1500W 30A
ماژول مبدل افزاینده ولتاژ DC به DC با خروجی متغیر 12 تا 97 ولت و جریان 30 آمپر و توان 1500 وات
ماژول مبدل DC-DC افزاینده ولتاژ 600W 10A با امکان کنترل جریان خروجی
ماژول مبدل افزاینده ولتاژ DC به DC با خروجی ولتاژ متغیر 12 تا 80 ولت و جریان 10 آمپر و توان 600 وات
ماژول XH-M604 یک کنترل کننده هوشمند شارژ باتری با نمایشگر دیجیتال است که امکان کنترل خودکار قطع و وصل شارژ را در بازه ولتاژی 6 تا 60 ولت فراهم میکند و برای انواع باتری ها در سیستم های DC بسیار کاربردی است.
5ماژول محافظ شارژ باتری لیتیومی 4 سل 30A
شارژر و محافظ Overcharge و Discharge باتری های لیتیومی 4 تایی سری شده با ماکزیمم جریان 30 آمپر
شارژر 5V 1A میکرو USB باتری های لیتیومی به همراه محافظ
مناسب برای شارژ باتری های لیتیومی با خروجی 1 آمپر دارای دو نشانگر LED جهت نمایش وضعیت باتری و محافظ شارژ و دشارژ
i47SHOP
اولین و جامع ترین فروشگاه ماژول های کاربردی در ایران
ثبت سفارش به صورت عمده واردات مستقیم از چین
تولید و ساخت ابزار الکترونیک به صورت عمده و پروژه ای.
لطفا ابتدا وارد شوید.
ورود به سیستم
یک حساب کاربری رایگان برای ذخیره آیتمهای محبوب ایجاد کنید.
ورود به سیستمیک حساب کاربری رایگان برای استفاده از لیست علاقه مندی ها ایجاد کنید.
ورود به سیستم